Thin-wall heat shrinkable tubing with bactericidal properties (with the addition of nanozinc)

Thin-wall heat shrinkable tubing with bactericidal properties (with the addition of nanozinc)

Application:

Heat-shrinkable bactericidal tubes are intended for the biological protection of the surface of elements. They provide durable and lasting protection against the development of microbes and fungi. They have a high min. 99.9 percent microbiological effectiveness.

Heat-shrinkable bactericidal tubes are intended for the biological protection of the surface of elements. They provide durable and lasting protection against the development of microbes and fungi. They have a high min. 99.9 percent microbiological effectiveness.

Bactericidal heat-shrinkable tubes from RADPOL are made of a special polymeric material with an addition of a nanocync, which reliably inactivates bacteria and other microorganisms in a very short time.

The effectiveness of germicidal RADPOL heat shrink tubing has been laboratory confirmed by the Institute of Polymer Materials and Dyes Engineering in Toruń.

Advantages

  • High microbiological efficiency
  • Easy and quick assembly
  • Resistant to damage and UV rays
  • Laboratory tested
  • Contains added nano zinc
  • Application

RADPOL’s bactericidal heat-shrinkable covers are designed for use in all public utility facilities where there is a risk of transferring microbes, e.g.: hospitals, health centres, pharmacies, waiting rooms, offices, banks, self-service stores, shopping malls, public transport, gyms, playgrounds, offices, clubs and restaurants, universities and schools.

When heated, the tubing takes the shape of the element on which it has been shrunk, forming a tightly adherent layer of antimicrobial character.

The antimicrobial activity of RADPOL tubing remains after it has been washed with detergents, alcohol, chlorine agents and disinfectants.

Material

Modified, stabilized polyolefin containing nanozinc particles, cross-linked by radiation.

Research report

TB / 2-8 / BIO / 2021 of 25.01.2021 Łukasiewicz Research Network – Institute for Engineering of Polymer Materials and Dyes Research Laboratory in Toruń.

Download the brochure

Cover application

The assembly of antimicrobial heat shrinkable covers is quick andeasy. To achieve permanent and effective biological protection onthe protected component, the following rules should be followed:

  • Heat shrinkable covers are shrink wrapped using hot airblowers. Capable of heating the cover above +120°C.
  • Place the cover over the surface of the item.
  • Set the blower temperature between +120 and +200°C. Theshrinking temperature should not exceed +200°C as the heatshrink tubing material may overheat.
  • Start shrinking it from the middle. Heat the cover all around,making sure that the shrinking is even. The middle part of thecover must shrink and adhere tightly to the surface of the tube.
  • Shrink the cover from the center to the ends. Heat the casingevenly, moving the heat source all the time over its surface, soas not to cause local overheating. A properly shrunken casingshould be smooth, without bulging notches.
  • Allow the coated element with the cover to cool completely.

Technical specifications

No. Properties Units Requirements Standard
1 Shrink temperature   120°C to 200°C  
2 Length change after shrinkage % max. +5 ÷ -10 EN 60684-2
3 Breaking strength MPa min. 14 EN 60684-2
4 Elongation at break % min. 350 EN 60684-2
5 Heat stroke (4h at 175°C)   no cracks, no dripping, no flow EN 60684-2
6 Winding resistance at low temperatures (time 4 h; temperature -25°C)   no cracks on the surface EN 60684-2
7

Antimicrobial properties
– The number of killed E. coli and S. aureus

% min. 99.9 ISO 22196:2011

 

Dimensions of heat shrinkable tubes

Type Inner diameter Nominal wall thickness when completely shrinked Color
RCH1Zn Minimum as delivered (before shrinking)

Maximum in a state of complete contraction

white or other as per order

D [mm] d [mm] s [mm]
25,4 12,7 0,90