Properties of the terminations
- resistant to hard environmental conditions,
- for cables with cross-sections up to 400 mm2 (concerns terminations with screw lugs),
- in case of terminations with screw terminals they limit the number of tools necessary for the assembling,
- heat shrink tubes applied in the termination create insulation protection against superficial discharges,
- resistant to UV radiation,
- full protection against moisture penetration,
- high electrical and mechanical resistance,
- short assembling time thanks to simple construction and attached installation guide,
Positive technical approving issued by Institute of Power Engineering in conformity with requirements of norms PN-90/E-06401 i PN-HD 629.1 S2:2006.
Termination sets enable making of three single-phase terminations, supplied with screw connectors.
|
Voltage range |
Cable cross-section [mm2] |
Type of cable termination |
Length [mm] |
Index |
|
6/10kV |
50-95 |
THP-I-10-CXd1 50-95 (S) |
450 |
WGEICD1IK00S1 |
|
|
120-240 |
THP-I-10-CXd1 120-240 (S) |
450 |
WGEICD1LO00S1 |
|
|
240-400 |
THP-I-10-CXd1 240-400 (S) |
450 |
WGEICD1OR00S1 |
|
8,7/15kV |
35-95 |
THP-I-15-CXd1 35-95 (S) |
450 |
WGEIDD1HK00S1 |
|
|
95-240 |
THP-I-15-CXd1 95-240 (S) |
450 |
WGEIDD1KO00S1 |
|
|
185-400 |
THP-I-15-CXd1 185-400 (S) |
450 |
WGEIDD1NR00S1 |
|
12/20kV |
35-150 |
THP-I-20-CXd1 35-150 (S) |
450 |
WGEIED1HM00S1 |
|
|
70-240 |
THP-I-20-CXd1 70-240 (S) |
450 |
WGEIED1JO00S1 |
|
|
185-400 |
THP-I-20-CXd1 185-400 (S) |
450 |
WGEIED1NR00S1 |
Termination sets enable making of three single-phase terminations, supplied with screw connectors.
|
Voltage range |
Cable cross-section [mm2] |
Type of cable termination |
Length [mm] |
Index |
|
6/10kV |
35-95 |
THP-I-10-CXd1 35-95 |
450 |
WGEICD1HK0001 |
|
95-240 |
THP-I-10-CXd1 95-240 |
450 |
WGEICD1KO0001 |
|
|
|
||||
|
8,7/15kV |
35-95 |
THP-I-15-CXd1 35-95 |
450 |
WGEIDD1HK0001 |
|
95-240 |
THP-I-15-CXd1 95-240 |
450 |
WGEIDD1KO0001 |
|
|
|
||||
|
12/20kV |
35-95 |
THP-I-20-CXd1 35-95 |
450 |
WGEIED1HK0001 |
|
70-240 |
THP-I-20-CXd1 70-240 |
450 |
WGEIED1JO0001 |
Termination sets enable making of three single-phase terminations. They are meant for termination cables with the use of compression terminals, sets don’t contain terminals.
