Rubber sealing rings
Przejdź do menu głównego
Przejdź do treści
Przejdź do stopki
Products
Electro&Tech
Heat shrink tubes
Heatshrinkable fittings
Cable joints and terminations
Cable ferrules and terminals
Electrical installation accessories
Vibroisolators
System Pipes
PE / PE RC pipes
Preinsulated pipeline systems
Business services
Machining Centre Service CNC
Services
Laboratory
Downloads
Certificates
Catalogues
Terms of sales and delivery
About us
Activities
History
Research and development
Awards and distinction
Certificates
Enviroment
Investor Relations
Management & Board
Company Corporate Arcs
Contact
Menu dostępności
Przełącz na wersję polską
Szukaj po słowie kluczowym
Szukaj
Preinsulated pipeline systems
/
Products
/
Preinsulated pipeline systems
/ Page 2
Rubber sealing rings
Material – rubber Pre-insulated pipe Dz [mm] Diameter Dp [mm] 90 130 110 150 125 165 140…
Adapters
Material – high-density polyethylene (HDPE)
Compensator E type
Non-preinsulated stool piece DN Steel pipe Max. working motion Mass Pipe external diameter dz e…
PE expansion pads
Material: cross-linked foamed polyethylene. Properties of PE expansion pads Deformation Shear stress 40 % 0,06MPa…
Warning tape
Black color Roll length – 100 mb, 50 mb
Radiation crosslinked heat shrink joints – characteristic
Heat shrink joints are designed for the reconstruction of the jacket pipe in the joint…
Cable support
Used as a support for signal cables to ensure adequate distance between the cable and…
Casing pipes
HDPE SPIRO Density [kg/m3] 959 7850 Melt flow rate MFR [g/10min] 0,2÷1,4 – Linear…
Carrier pipe
The steel carrier pipe meets the requirements of PN-EN 253. seamless steel pipes – made…
Pre-insulated pipes
Preinsulated pipes in the range of diameters DN20 ÷ DN1000 with a steel carrier pipe…
Services
We offer: preparation of technical designs of district heating networks in the RADPOL technology, static…
Branch bend joint
The branch joint is used to make branches when making connections from the transmission network.…
Open joints
Standard electro-couplers are designed for the construction of pre-insulated pipes networks.
Open repair joints
Repair electro-couplings are dedicated to removing failures on pre-insulated pipelines.
Heat shrink pipe double end caps – type REC
END-CAPY are dedicated to steel carrier pipes. END-CAP Dimension of preinsulated pipe [mm] REC dimensions…
Welder head
Teflon coated head with anti-adhesive layer, for heating the cork and the hole in the…
Taper cutter
The Ø27 conical cutter allows holes for embedded plugs to be made. Ensure that the…
Burner with 3 Nozzles Ø 25 35 50 mm
Specification: Gas powered propane butane Ease of use while maintaining very good performance and safe…
Termometer ST 9293A
Range: -50°C to + 300°C stainless probe 133 mm long HOLQ measurement stop measurement every…
PUR liquid foam for crosslinked joint insulation
Pur foam contains: polyol (compound A), izocyanate (compound B). They are supplied as sets matching…
Preinsulated curved HDPE-jacket pipes (diffusion barrier)
DN Steel pipe diameter od Carrier pipe wall thickness Outer diameter (OD) of the casing…
Inlet elbows
Typical angle α = 90°. With or without an alarm system
Preinsulated reductions
Preinsulated reductions in the STANDARD insulation DN1 DN2 20 25 32 40 50 65 80…
Preinsulated fixed points
Steel pipe HDPE casing pipe Retaining plate dimensions Ring thickness Max. force DN Retaining plate…
E type disposable expansion joints
Bellows expansion joint, not preinsulated.
HDPE collars
Material – high-density polyethylene (HDPE)
DN400-1000 heat-shrink terminal gaskets
Preinsulated pipe Post-shrinking diameter Width of the terminal gasket Length OD (mm) D (mm) S…
Preinsulated TWIN pipe with HDPE jacket
Preinsulated pipes with lengths L = 6, 12 m.
Preinsulated TWIN pipe with diffusion barrier
RADPOL offers an unique solution: full antidiffussion system in preinsulated TWIN pipes. Thanks to this…
Preinsulated TWIN pipe with UV PROTECT COLOR jacket
TWIN UV PROTECT COLOR preinsulated pipes have casing made of specially modified HDPE resistant to…
Transition preinsulated bends from TWIN pipes to single pipes
The insulation jacket is made as standard HDPE, diffusion barrier, UV PROTECT COLOR. On request,…
Preinsulated TWIN bends
Typical angles α = 90°, 60°, 45°, 30°. Non-standard angles 5° ≤ α ≤ 90°,…
Inlet elbows TWIN
Typical angles α = 90°, 60°, 45°, 30°. Non-standard angles 5° ≤ α ≤ 90°,…
Parallel TWIN pipes
The insulation jacket is made as standard HDPE, diffusion barrier, UV PROTECT COLOR. On request, pipes can be delivered in a color…
Preinsulated TWIN reductions
The insulation jacket is made as standard HDPE, diffusion barrier, UV PROTECT COLOR. On request, pipes can be delivered…
Top preinsulated vents, drains TWIN
The insulation jacket is made as standard HDPE, diffusion barrier, UV PROTECT COLOR. On request, pipes can be delivered in a color…
1
Aktualna strona
2
3