Preinsulated pipeline systems

Straight plug welding machine

Straight plug welding machine

The RSP 2a straight plug welding machine is intended for fusing plugs to plug the…
Heat shrink sleeve, straight for preinsulated pipeline system

Heat shrink sleeve, straight for preinsulated pipeline system

Heat shrink straight sleeves are designed for performing joints with a use of pre-foamed half-shells.…
Heat shrink end caps pipe – type REC___Z

Heat shrink end caps pipe – type REC___Z

 
Plug handle

Plug handle

The handle allows the plug to be properly heated, without the risk of perforation through…
PE casing pipes

PE casing pipes

Material – high-density polyethylene (HDPE). Polyethylene pipes are seamless, resistant to impact at the temperature…
Preinsulated HDPE-jacket pipes

Preinsulated HDPE-jacket pipes

Pre-insulated pipes with lengths L = 6,  12,  16 m.  
Preinsulated pipes with a diffusion barrier

Preinsulated pipes with a diffusion barrier

Pre-insulated pipes with lengths L = 6,  12,  16 m.  
Preinsulated UV-resistant jacket pipes

Preinsulated UV-resistant jacket pipes

Pre-insulated pipes with lengths L = 6,  12,  16 m.  
Preinsulated SPIRO-jacket pipes

Preinsulated SPIRO-jacket pipes

Pre-insulated pipes with lengths L=6, 12 m. On a standard basis, the SPIRO jacket is…
Preinsulated bends

Preinsulated bends

Typical angles α = 90°,  60°,  45°,  30° Untypical angles 5°≤ α ≤ 90°, gradation…
Perpendicular T-pipes

Perpendicular T-pipes

Main DN1 pipeline with a length of L1 = 1.5 lin. m DN2 pipeline with…
Parallel T-pipes

Parallel T-pipes

DN 1/H Insulation Standard Insulation PLUS Insulation PLUS PLUS 20÷50 ~ 300 ~ 320 ~…
Pre-insulated reducing pipes

Pre-insulated reducing pipes

Preinsulated expansion joints

Preinsulated expansion joints

DN Steel pipe Pipe outer diameter HDPE casing pipe   Expansion capability STANDARD insulation PLUS insulation PLUS…
Łuki preizolowane odgałęzienia °

45° branch preinsulated bends

Formulas for selection: Hmin = 0,5 x (OD1 + OD2) + 70 [mm] A =…
Łuki preizolowane odgałęzienia °

90° branch preinsulated bends

DN1 [mm]     Hmin [mm]     20 ÷ 50 ~300 65 ÷ 100 ~370 125 ÷ 200 ~485 250…
Zawory odcinające preizolowane DN÷

Preinsulated DN25-300 shut-off valves

DN Steel pipe HDPE casing pipe Valve stem insulation Height Weight Outer pipe diameter STANDARD…
Zawory odcinające z odpowietrzeniem preizolowane DN÷

DN32-300 preinsulated shut-off vent valves

DN Steel pipe HDPE casing pipe   Valve stem insulation Vent nominal diameter Height Weight…
Preinsulated shut-off drain valves

Preinsulated shut-off drain valves

DN Steel pipe HDPE casing pipe STANDARD insulation Drain nominal diameter Height Weight Outer pipe…
Preinsulated shut-off drain-vent valves

Preinsulated shut-off drain-vent valves

DN Outer steel pipe diameter HDPE casing pipe Valve stem insulation Vent nominal diameter Vent…
Top preinsulated vents, drains

Top preinsulated vents, drains

DN Steel pipe HDPE casing pipe Nominal drain meter Nominal vent diameter Height Outer pipe…
Bottom preinsulated drains

Bottom preinsulated drains

  Steel pipe HDPE casing pipe   HDPE casing pipe DN Outer pipe diameter STANDARD…
Radiation crosslinked heat-shrink straigh joints

Radiation crosslinked heat-shrink straigh joints

Heat shrink joints are designed for the reconstruction of the jacket pipe in the joint…
Radiation crosslinked heat-shrink bell-ended joint

Radiation crosslinked heat-shrink bell-ended joint

Heat shrink joints are designed for the reconstruction of the jacket pipe in the joint…
Electrically welded sleeves

Electrically welded sleeves

Preinsulated pipe OD [mm] “L” length [mm] “B” width  [mm] Thickness [mm] 90 700 or 850…
Radiation crosslinked heat shrink bend joint

Radiation crosslinked heat shrink bend joint

Bend joint is designed for changing the direction of the preinsulated pipeline to any angle…
Radiation crosslinked heat shrink reduction joint

Radiation crosslinked heat shrink reduction joint

Reduction joints are meant for the recovery of preinsulated pipes’ jackets of two different diameters.
Branch joint

Branch joint

Dzm1,  Dzm2 – diameter values are selected in accordance with the heat-shrink joint table Type…
Galvanized steel sleeves

Galvanized steel sleeves

Material – galvanized steel
HDPE termination sleeves

HDPE termination sleeves

Material – high-density polyethylene (HDPE)
Heat-shrink tapes with a reinforcing strip

Heat-shrink tapes with a reinforcing strip

Material: • heat-shrink tape – cross-linked polyolefin • reinforcing strip – glass fibre-reinforced polyolefin Casing…
Blank plugs

Blank plugs

Material   - Polyethylene                       Standard color - black                                                               Plugs are packed in bags (50 pieces…
Placeholder

Pulse system – measuring devices

A meter intended for measuring pulse alarm system in pre-insulated heat distribution networks - LX9024…
Placeholder

Resistance system – accessories

Collets BS - QU Used to connect alarm system wires by means of special clamping…
Placeholder

Resistance system – measuring devices

The tool intended for measuring and detecting conditions in pre-insulated heat distribution network with resistance…
Heat shrink end caps pipe – type “REC”

Heat shrink end caps pipe – type “REC”

They are applied in district heating industry, power engineering, construction engineering and telecommunication.